Page 14
*
Do not use thermal paper containing Sodium (Na+), Potassium (K+) and Chlorine
(Cl-) ions that can harm the print head thermal elements.
*
If the surface of thermal paper is scratched with a hard object such as a nail, the
paper may become discolored.
*
Use only water paste, starch paste, polyvinyl paste or CMC paste when gluing
thermal paper.
*
If thermal paper touches anything containing ophthalmic acid ester plasticizer for a
long time, the image formation ability may be reduced or the printed image may
fade.
*
Use of volatile organic solvents such as alcohol, ester and ketone or some adhesive
tapes on thermal paper can cause discoloration.
*
Thermal paper must not be stored with the printed surfaces against each other as the
printing may be transferred between the surfaces.
*
Since the paper roll is highly thermal sensitive, please keep them in a dark place
that is 20º and 65% RH when not installed in the printer. Avoid extended exposure
to direct light. Use only products made from polyethylene, polypropylene or
polyester for storage of thermal paper.
SPECIFICATIONS
PRINTER
ITEM
SPECIFICATION
Interface
USB Interface
Maximum Printing Speed
300mm/sec
Paper Type
Thermal roll paper
Printing Method
Thermal dot line printing
Paper Width
83/80/58 +0/-1 mm
Maximum Printable Width
80mm
Default Printing Width
64 mm (512 dots/line)
Paper Feed Method
Friction auto-feed
Paper Load Method
Drop and use
Paper cutting method
Slide cutting
Type of paper cutting
Full cut or Partial cut (1.5±0.5mm tab
left at the center)
Paper roll outside diameter
maximum
φ
80mm (install the tension
roller around the paper inlet.)
Minimum paper core diameter
φ
18mm
Minimum paper cutting length
20mm
