POSEIDON PE 100-T, Инструкция по эксплуатации

Страница: 19 / 46

Instruction Manual
w
PE 100-T
13
Fig. 12 Condensate drain taps
1 2
4.
Switch on the unit:
•
PE 100-TE: Shift switch (1, Fig. 13) to position I.
•
PE 100-TW: Press switch (2, Fig. 13) to position I.
•
PE 100-TB: Shift switch (1, Fig. 14) to position I. Set
choke (2, Fig. 14) to position START. Start engine
with recoil starter. As soon as motor runs smoothly
return choke to normal operating position.
Fig. 13 Motorschutzschalter
1
2
Fig. 14 Petrol engine
2
1
5.
As soon as final speed is reached close condensate
drain tap (1, Fig. 12) of intermediate separator (on
petrol units close additionally the condensate drain
tap (2, Fig. 12) of final separator).
6.
Bottle will be filled. Observe pressure gauge and
drain condensate regularly during filling.
To avoid needless aperture of the safety
valve, the compressor must be switched
off manually as soon as the filling
pressure is reached. Filling pressure =
safety valve setting pressure - 10 bar, i.e.
PN200 units must be switched off at 215 bar, PN 300
units at 320 bar.
Open condensate drain tap (2, Fig. 12)
and drain shortly the final separator prior
to switching off the unit.
7.
Switch off the unit:
•
PE 100-TE: Shift switch (1, Fig. 13) to position 0
•
PE 100-TW: Press switch (2, Fig. 13) to position 0.
•
PE 100-TB: Shift switch (1, Fig. 14) to position 0.
8.
Close bottle valve first (1, Fig. 15), then filling
valve by returning handle to closed position (2).
Remove compressed air bottle.
Fig. 15 Removing air bottle
2.
1.
9.
Open condensate drain of the intermediate separa­
tor. Unit is ready for filling.
Repeat the above described filling procedure to fill further
bottles.
3.4. SHUT-DOWN PROCEDURE
1.
Switch off the unit:
•
PE 100-TE: Shift switch (1, Fig. 13) to position 0
•
PE 100-TW: Press switch (2, Fig. 13) to position 0.
•
PE 100-TB: Shift switch (1, Fig. 14) to position 0 and
close fuel tap.
2.
Drain condensate from intermediate and final sepa­
rator by means of drain taps (1 and 2, Fig. 12). Let