Switch off the machine's drive unit before carrying out any adjustments.
Only use original - POSCH - spare parts.
Do not modify or tamper with the machine.
Work on electrical equipment must only be carried out by qualified electricians.
Never use damaged cables.
The machine must not be started up in bad weather (rain, snow, etc.) without covering.
Safety information (sawing)
Do not hold the log in your hand while sawing.
Do not remove offcuts or other parts of the workpiece from the cutting area while the
machine is running.
Never reach towards the rotating saw blade (gloves pose a particularly high risk as these
can easily get caught).
Only use the machine outdoors.
Should the machine be used indoors, however, a local extractor unit (extraction at
source) is required.
The machine must always be properly maintained and must be kept free of waste material
such as chips and sawn-off pieces of wood.
Wear eye/face protection when working to protect against foreign bodies (dust, chips,
splinters, etc.).
Use respiratory protection to reduce the risk of inhaling harmful dust.
Wear cut-resistant gloves when working.
Wear safety shoes (safety class S3) and close-fitting clothes when working with this device.
Only use saw blades that are designed to reduce noise.
Do not use damaged or deformed saw blades.
Minimum saw blade
diameter
Maximum saw blade
diameter
Bore
690 mm
700 mm
30 mm
Only saw blades conforming to the EN 847-1 standard may be used.
When turning off the machine, always be careful of the tool runout until the machine has
come to a standstill.
The working pressure of the hydraulic system must not exceed 150 bar.
Safety information (conveyor belts)
Keep clear of the danger zone!
It must be expected that material will be ejected at high speed to any position within this
area.
Never reach into the hopper or touch the conveyor belt when the machine is running.
Safety information
9
