Maximum PTO shaft speed:
▪ 480 rpm
The maximum PTO shaft speed must on no account be exceeded, otherwise the oil will
become too hot. This leads to premature wear and leaks in the pump, cylinder and hydraulic
pipes.
Before disengaging the universal joint shaft, set the manual throttle of the tractor to
minimum.
The universal joint shaft must be stored in the universal joint shaft linkage when it is
disconnected.
If your tractor is fitted with a hydraulic PTO clutch, it is vital that you use a universal
joint shaft with free wheel.
Electric motor or universal joint shaft drives
Locking plate
1
2
1
2
1
Locking plate
2
CEE plug
Setting the drive variants:
Position
Drive
Locking plate open
Universal joint shaft drive
Locking plate closed
Electric motor drive
▪ Swivel the locking plate to the desired position.
If the machine is to be operated electrically, the locking plate must be locked to the PTO
shaft. If this is not done, the CEE plug cannot be connected.
4.3
4.3.1
Start-up
20
