Changing the V-belt
Tips on changing the V-belt
If one V-belt is being changed, then all V-belts must be changed!
The V-belts must be fitted loose. If they are "forced" onto the V-belt pulley, they may be
damaged and quickly tear.
The V-belts must be tensioned so that they deflect about 8 mm in the middle when
thumb pressure is applied.
V-belt types
Machine type
Belt
Quantity (pcs)
Item no.
Z
XPA 1320 Lw
5
Z1940119
ZE11
XPA 1320 Lw
5
Z1940119
Changing the V-belts on a PTO drive
1
2b
2a
2c
5
5
7
7
6
8
3
4
1
Guard plate
5
Hexagon bolt - Bearing holder
2
V-belt cover
6
Bearing holder
3
Lock nut
7
Fitting screw - Bearing holder
4
Tensioning screw
8
Pedestal bearing
▪ Open the protective cover and swing backwards.
▪ Undo the hexagon bolts of the guard plate and remove the plate.
▪ Undo the hexagon bolts of the V-belt covers and remove the covers.
▪ Loosen the lock nut on the tensioning screw.
▪ Release the V-belts by turning the lock nuts.
9.3
9.3.1
9.3.2
Maintenance
41
