Work operation
Only one person may operate the machine at a time.
Ensure that no other people are near the machine.
In order to ensure optimal operation of the sensor system, the machine should be run
at idling speed for at least 3 minutes.
At outdoor temperatures below 0°C, let the machine idle for approximately five minutes
to allow the hydraulic system to reach the correct operating temperature (the hydraulic pipes
will then be warm to the touch).
Sawing
1
2
3
1
Billet
3
Place of operation
2
Log carriage
▪ Move the conveyer belt to the working position.
See ..... Conveyor belt [➙ 25]
▪ Set the required log section length.
▪ Start the machine.
▪ Start the log carriage.
See ….. Main control
5.2
5.2.1
Operation
28
