PORT SML-1145, Руководство пользователя

Страница: 12 / 26

Installing Interior Panel and Wire
1) Install the second waterproof
rubber gasket (Part #5)
2) Connect the wires to the exterior
panel wire (just plug in and click)
3) Connect the interior panel to the
exterior panel using the M4 screws
(Parts 13 and 14) (pick the desired
length based on the door thickness)
that goes through the latch and
screws onto the bushing
4) Do the same process using the M5
screws (Part #16, 17 and 18) that
goes through the top hole and
connects to the bushing. (Make sure
to tighten screws all the way so it
doesn’t slide.)
Install Interior Panel
1) Remove the glass battery cover
using the suction cup (Part #20)
2) Install the interior case using the
(4) M4x6mm screws (Parts #15)
11