PORT SML-1145, Руководство пользователя

Страница: 24 / 26

Hardware Troubleshooting
1) After installation, the touch
keypad is not responding
a.) In this case, first check that the
positive and negative electrodes of the
battery have been installed
upside down, whether the battery has
enough power
b.) Remove the back panel and see if
it’s connected
c.) To eliminate the above
situation, you need to remove the
lock, check whether the wires of the
lock body are squeezed, and then re-
wire
2) Why does the smart lock
consume so much power?
a.) Large standby power
consumption
b.) Short circuit
3) Can you adjust the volume? a.) The Bluetooth system can only
turn the sound On or Off, and
cannot adjust the volume
b.) The non-Bluetooth system can
adjust the volume
4) There is no response, when using
the handle on the outside of the door;
and the inside of the door is
responsive, but the verification and
motor is normal
It may be that the triangle
direction on the clutch has an error,
please check connection
5) The keys do not respond, and the
lights are off
Most of the time this happens because
the door lock is out of power
6.) How many times can I put the
incorrect password before it locks me
out?
• Bluetooth: Enter wrong 5 times
and it locks for 5 mins
• Non-Bluetooth: Enter wrong 5
times, locks for 1 min
23