PORT SML-1145, Руководство пользователя

Страница: 11 / 26

Installation Instructions
Install Latch
1) Use the template enclosed to cut
holes for the door.
٭It is important to follow the template
2) Adjust the latch to the desired
backset (2 3/8’’ or 2 3/4’’)
3) Install the latch using the 25x4mm
(Parts #12) for wood doors and
10x5mm (Parts #11) screws for
aluminum doors
Install Exterior Panel
1) Install the M4x30mm (Part #8)
bushing on the bottom two bolts next
to the spindle
2) Screw the 16x5mm (Part #10)
machine screw into the M5x30mm
threaded bushing, then insert into the
slot shown. Adjust the height based on
the distance of the smaller hole and
tighten
3) Install one of the waterproof rubber
gasket (Part #5)
4) Insert the preinstalled spindle into
the door, keeping the arrow on the
spindle facing the same direction of the
latch.
٭ The two bottom bushing next to the
spindle and top bushing need to be
inserted through the hole
simultaneously (Make sure to insert the
wire through the top hole).
10