Porsche PCM3.1 Скачать руководство пользователя страница 97

Страница: 97 / 206

PHONE

Displaying details for the authorised

Bluetooth

device

Open the list of authorised

Bluetooth

devic-

es.

Select any device in the list.

Select “

Device details

”.

The following information is displayed:

– the device name,

– the

Bluetooth

address,

– the connection quality as well as

– the supported services.

Adding a new

Bluetooth

device

For the PCM to find your

Bluetooth

device,

please ensure that the

Bluetooth

function on the

device has been activated and set to “visible”.

If you want to connect a mobile phone using the

SIM Access Profile, external SIM mode needs to

be activated on some devices.

Further details can be found in the operating man-

ual for your mobile phone.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

SET PHONE

”

> “

Bluetooth settings

”

> “

New device

”.

A search is started and a list of the devic-

es found is displayed.

Choose the device you want by selecting it in

the list.

Bluetooth

code is displayed that you must

enter in the corresponding

Bluetooth

device.

Once you have entered the code, successful

authorisation of the device is shown on the dis-

play.



With some mobile phones, the connection re-

quest by the PCM must be explicitly confirmed

on the mobile phone. This may even have to

be done a number of times in some cases,

for example before transferring the phone-

book.

To avoid this request, you can authorise the

PCM in your mobile phone’s list of devices.

The connection will then be established auto-

matically in the future, without the need for fur-

ther checks.

Further details can be found in the operating

manual for your mobile phone.
It can take a few seconds for the

Bluetooth

device to be authorised.

If the list of authorised

Bluetooth

devices is

full (max. 5 mobile phones), you must first de-

lete a device from the list. An appropriate

message will be displayed. To find out more,

please refer to the section “Deleting an au-

thorised Bluetooth

device from the list” on

page 96.

Содержание PCM3.1















































































































































































































Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды

Porsche PCM3.1, Руководство по эксплуатации

Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды