Porsche PCM3.1 Скачать руководство пользователя страница 69

Страница: 69 / 206

PHONE

Establishing a connection from an

external

Bluetooth

device

If the PCM does not find your mobile phone or a

connection attempt by the PCM fails, you can also

start the authorisation from the mobile phone.

If another mobile phone is connected with the

PCM, switch off

Bluetooth

on the connected

mobile phone to disconnect the connection

with the PCM.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

The PCM is now visible for external devices.



Please ensure that the

Bluetooth

visibility of

the PCM is activated. To find out more, please

see the following section.

Using the mobile phone, search for audio ac-

cessories or devices that support

Bluetooth

Refer to the manufacturer’s operating instruc-

tions to find out how to do this.

Select the device “PCM” from the mobile

phone’s search results and establish a connec-

tion.

Refer to the manufacturer’s operating instruc-

tions to find out how to do this.

A request appears on the PCM display.

Select “

”.

A keypad appears where you enter a four-digit

Bluetooth

code of your choice and confirm

with “

”.

Enter the same

Bluetooth

code on your mo-

bile phone.

Once you have entered the code, successful

authorisation of the device is shown on the dis-

play.

With many mobile phones, the connection with

the PCM must be explicitly established from

the mobile phone following authorisation. Fur-

ther details can be found in the operating man-

ual for your mobile phone.



With some mobile phones, the

Bluetooth

code must be directly provided by the mobile

phone during the connection request. If this is

the case, enter a 4-digit code of your choice

on your mobile phone and confirm it with OK.

You will then be shown a keypad on the PCM

display where you must enter the same code

and confirm it.

Setting visibility

To ensure that your PCM can be found by other de-

vices via the

Bluetooth

interface, it must be “vis-

ible” (=recognisable) for other devices during the

search.

To prevent further unwanted connection requests,

you can deactivate visibility of the PCM after the

connection operation.

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Bluetooth settings

”.

Select “

PCM visible

” to activate ( ) or

deactivate ( ) visibility of the PCM.

Содержание PCM3.1















































































































































































































Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды

Porsche PCM3.1, Руководство по эксплуатации

Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды