Porsche PCM3.1 Скачать руководство пользователя страница 49

Страница: 49 / 206

DISC



With some devices, it may be necessary to

set the volume on the device.
Recommendation:

Set the required volume on the external

Bluetooth

audio source.

Then set the volume you want on the PCM.



The functions and displays depend on the ac-

tive Bluetooth

device.

Skipping a track

If you want to skip to the next track, briefly

press the

button.

If you want to skip back to the start of the

track/to the previous track, briefly press the

button.

Fast forward/reverse

Press the

button or

button in AUX BT mode

until the position you want is reached.

Repeating a track

Activating this function repeats the current track.

Select “

Repeat

” in Bluetooth

AUX mode to ac-

tivate ( ) or deactivate ( ) the function.

to switch it off -

Press the

button.

Switching the shuffle function on/off

When you activate this function, the current track

is played to the end. All tracks are then played in

random order.

Select “

Shuffle

” in Bluetooth

AUX mode to ac-

tivate ( ) or deactivate ( ) the function.

Starting/stopping scanning

When this function is activated, each track from

the external audio source is played for approx.

10 seconds.

Press the

button repeatedly until the

“

AUX BT

” audio source is highlighted in the bot-

tom line.

Select “

Start scan

” to activate the function.

Select “

Stop scan

” to deactivate the function.

The track from the external audio source that

has started playing will continue to play.

Bluetooth

settings

Calling up

Bluetooth

settings

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

SET DISC / AUX

”

> “

Bluetooth settings

”.



You will only be able to access the “

SET DISC

/ AUX

” menu if there is at least one audio

source from the DISC area available.

Switching

Bluetooth

on/off

Switching

Bluetooth

Select “

Switch on Bluetooth

” in the

Bluetooth

settings.

Switching

Bluetooth

off

Select “

Switch off Bluetooth

” in the

Bluetooth

settings.

Содержание PCM3.1















































































































































































































Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды

Porsche PCM3.1, Руководство по эксплуатации

Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды