manualshive.com logo in svg

Porsche PCM3.1, Руководство по эксплуатации

Поделиться
Скачать
Porsche PCM3.1 Скачать руководство пользователя страница 164

164

NAVI

The orange-coloured arc segment points in the di-

rection of the navigation point currently being nav-

igated to. The angular deviation between the cur-

rent direction of travel and the direction to the next 

navigation point is shown as an orange-coloured 

segment. The angular deviation is indicated in de-

grees.

1.

Press the 

f

 button.

2.

Select “

Stored destinations

”.

The personal destination memory is opened.

3.

Select the trace you want in the list.

4.

Select “

Start route guidance

”.

If off-road navigation is not yet activated, the 

safety notice is displayed. 

5.

Confirm the safety notice with “

Activate „off-

road“

” if applicable to activate off-road naviga-

tion.

6.

Select the direction of travel you want and the 

start point you want along the route to be driv-

en.

Route guidance is started.

Reloading data

Changing the navigation database

If the selected destination lies outside of the cur-

rent navigation database, a route is calculated to 

a point that is close to the destination entered and 

is located within the database. Route guidance 

from this point is interpreted as off-road route 

guidance, as there is no map data available.
If there is additional map data available on the 

PCM, this can be reloaded.

If a selected destination lies outside of the 

current database and there is a geographical 

coordinate saved for this destination, route 

guidance to this destination can be started.

1.

Press the 

f 

button.

2.

Press the 

i

 button or touch the tab of 

the same name in the header.

3.

Select “

SET NAVI

” 

> “

Re-load data

” 

> “

Database switch

”.

A list of the available databases is 

opened.

4.

Select the required database in the list.

5.

Confirm the prompt that appears and perform 

the database search by selecting “

Yes

”.

Содержание PCM3.1















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды