Porsche PCM3.1 Скачать руководство пользователя страница 148

Страница: 148 / 206

148

NAVI

Entering/editing a telephone number for a

destination in the destination memory

In the personal destination memory you can cre-

ate a telephone number for each destination for

standard navigation.

You cannot enter or edit a telephone number if the

destination you want is a trace or a point of inter-

est (destinations for off-road navigation).

Press the

button.

Select “

Stored destinations

”.

The personal destination memory is opened.

Select the destination you want.

Select “

Edit

”

> “

Telephone number

”.

The input menu for telephone numbers is

opened.

Enter the number you want and confirm by se-

lecting “

”.

Editing the destination name



The two personal destinations “

GO HOME

“

and “

GO TO OFFICE

” cannot be renamed.

Press the

button.

Select “

Stored destinations

”.

The personal destination memory is opened.

Select the destination you want.

Select “

Edit

”

> “

Destination name

”.

The input menu is opened.

Make the change you want and confirm by

selecting “

”.

Calling the destination

You can store a telephone number for destinations

held in the personal destination memory. This

menu item is not available if the telephone function

is not available or if you have not stored a tele-

phone number for the destination.

Press the

button.

Select “

Stored destinations

”.

The personal destination memory is opened.

Select the destination you want.

Select “

Call

”.

The number stored in the database is dialled.



Telephone numbers are also stored for the

points of interest held on the hard drive. If, for

example, you select a point of interest in the

map view, you can establish a telephone con-

nection by selecting “

Call

” in the detailed view

of the map view.

To find out more, please refer also to the sec-

tion “Searching for points of interest in the

map view” on page 152.

Deleting a destination

Press the

button.

Select “

Stored destinations

”.

The personal destination memory is opened.

Select the destination you want.

Select “

Edit

”

> “

Delete

”.

Deleting a destination from the list

Confirm the prompt that appears by selecting

“

Yes

”.

The chosen destination is deleted from the list.

Deleting the entire list

Select “

Delete list

”

> “

Delete all

”.

The entire personal destination memory is

deleted. Deletion also affects the two per-

sonal destinations “

GO HOME

“ and “

GO TO

OFFICE

”.

Содержание PCM3.1















































































































































































































Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды

Porsche PCM3.1, Руководство по эксплуатации

Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды