Porsche PCM3.1 Скачать руководство пользователя страница 156

Страница: 156 / 206

156

NAVI

From the destination memory

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Stopovers

”

> “

Add

”

> “

Stored destinations

”.

The personal destination memory is

opened.

Select the destination you want.

The destination is accepted as a stopover.

Entering a point of interest as a stopover

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Stopovers

”

> “

Add

”

> “

POI

”.

The POI search is opened.

Select the point of interest you want.

The destination is accepted as a stopover.

To find out more about the POI search, please

refer to the section “Points of interest” on

page 151.

Entering a stopover using geographical

coordinates

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Stopovers

”

> “

Add

”

> “

Adv. destination input

”

> “

Geo. co-ordinates

”.

An input menu for geographical coordi-

nates is opened.

Enter the geographical coordinates you want

and confirm by selecting “

”.

Entering a stopover using the map

Press the

button.

Press the

button or touch the tab of

the same name in the header.

Select “

Stopovers

”

> “

Add

”

> “

Adv. destination input

”

> “

Destination via map

”.

The map view is displayed.

Set the destination you want by touching the

map and confirm by selecting “

”.

Inserting a destination from the map (point

positioning)

Touch the map view when route guidance is un-

derway.

A crosshair is displayed.

Touch the symbol for a point of interest or any

other point in the map view.

The name of the point of interest or the ad-

dress of the chosen point is displayed in the

header.

Open the detailed view by pressing the right ro-

tary knob

or by touching the header.

Select “

As stopover

”.

The chosen destination is stored in the destina-

tion list as point positioning and indicated with

the

symbol.

Via destinations

If you have selected a motorway junction as a

stopover, this stopover is interpreted as a via des-

tination.

As soon as a stopover is approached as an active

destination, the via destination is also displayed in

the list of previous destinations.
No estimated time of arrival is given for via desti-

nations.

Содержание PCM3.1















































































































































































































Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды

Porsche PCM3.1, Руководство по эксплуатации

Результаты поиска

Содержание PCM3.1

Отзывы:

Бренды по названию

Популярные бренды