Minor Repairs
309
Removing headlights
1. Switch off the ignition and remove the ignition
key, or pull out the control unit on vehicles with
Porsche Entry & Drive.
2. Open the engine compartment lid.
3. Take a socket wrench out of the tool kit.
4. Place the socket wrench on the release and
turn in direction of arrow until you feel and hear
the headlight being released.
5. Pull headlight approx. 4 in. (10 cm) forward
out of the fender.
6. Press back the release tab of the connector
A
and pull connector off.
7. Press the release lever on the underside of the
rapid-action coupling on the breather hose
B
up and pull it off.
8. Pull headlight out completely.
Installing headlights
1. Move the headlight release mechanism to
unlock position. Insert the headlight into the
guide rails, attach the connector
A
and
breather hose
B
and then slide the headlight
fully into the fender.
2. Press the headlight to the rear and
simultaneously turn the socket wrench in
direction of arrow. You should feel and hear the
headlight locking mechanism engage.
3. Check that the headlight is seated securely.
4. Remove the socket wrench and place it in
the tool kit.
5. Close engine compartment lid.
