Porsche PANAMERA S -, Руководство пользователя

Страница: 138 / 343

136
Instrument Panel and Multi-Function Display
Sport Chrono on multi-function display
All stopwatch displays are started and stopped in
the “Chrono” menu on the multi-function display.
For instructions on using the multi-function
display:
f Please see the chapter “OPERATING THE
MULTI-FUNCTION DISPLAY IN THE
INSTRUMENT PANEL” on page 115.
Notes on operation
If you exit the “ Chrono ” menu while the stopwatch
is running, measurement will continue.
The stopwatch stops after the ignition is switched
off. If the ignition is switched on again within
approximately 4 minutes, the stopwatch will
continue to run.
The only way to reset the stopwatch to zero is
by selecting “
Reset
” in the “
Chrono
” menu.
For information on resetting the stopwatch:
f Please see the chapter “RESETTING THE
STOPWATCH TIME” on page 137.
A - Current stopwatch time
B - Reference time (fastest lap)
C - Number of completed laps
D
- Circle display: Compares the current lap time
with the reference time
Starting timing
The stopwatch time A is displayed simultaneously
on all stopwatch displays in the vehicle.
R - Lap time (stored)
Z - Intermediate time (not stored)
Stopping lap/Starting new lap
The current stopwatch time can be stored as a lap
time while the stopwatch is still running.
1.
Select
> “ Chrono ”
and confirm.
1. Select
> “ Chrono ”
2. “ Start ”
and confirm.
1.
Select
> “ Chrono ”
2. “ Round ”
and confirm.