15
Installation Instructions
US
FC
ESM
PTB
TR
RU
UK
MON
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
Installation Instructions
Basic Wall Mount
Selecting a suitable installation location
The basic wall mount is designed for indoor and
outdoor installations.
The following criteria should be considered when
selecting a suitable installation location:
– Install the electrical socket and basic wall mount
preferably in a covered area protected against
direct sunlight and rain (e.g. in a garage).
– Do not spray the basic wall mount directly with
water (e.g. high-pressure cleaning equipment or
garden hoses).
– Do not install the basic wall mount under
suspended or hanging objects.
– Do not install the basic wall mount in stables,
livestock buildings or locations where ammonia
gases occur.
– Install the basic wall mount on a smooth surface.
– In order to ensure secure fastening, check the
condition of the wall before installing.
– Install the basic wall mount so that it is not near
pathways and the charging cables do not cross
any pathways.
– Install the basic wall mount so that the distance
between the plug and the socket does not exceed
the length of the available supply cable.
– Install the electrical socket as close as possible
the preferred vehicle parking position. Take the
orientation of the vehicle into account.
– The distance of the electrical socket from the
floor and ceiling should be selected in compliance
with national regulations and standards so that
comfortable use is ensured:
The Mobile Charger shall be mounted at a suffi-
cient height from grade such that the height of
the storage means for the coupling device is
located between 24 in. (600 mm) and 4 ft.
(1.2 m) from grade.
f
Refer to chapter “Important Safety Instructions”
on page 3.
Tools required
– Spirit level
– power or hammer drill
– screwdriver
Installing basic wall mount
Fig. 1: Drilling dimensions
1.
Mark the drill holes on the wall.
2.
Drill the mounting holes and insert wall plugs.
3.
Press wall mount
2
from the front into the cable
guide
1
.
4.
Screw the wall mount onto the wall.
DANGER
Electric shock, fire
Improper use of the Mobile Charger or non-compli-
ance with the safety instructions may result in short
circuits, electric shocks, explosions, fires or burns.
e
Do not install the basic wall mount in potentially
explosive atmospheres.
e
To reduce the risk of explosion, particularly in
garages, make sure that the control unit is located
at least 19.7 in. (50 cm) above the floor during
charging.
e
To reduce the risk of fire, connect only to a circuit
provided with 20 amperes (for Mobile Charger
with 3.6 kW/16 A) or 50 amperes (for Mobile
Charger with 9.6 kW/40 A) maximum branch
circuit overcurrent protection in accordance with
the ANSI/NFPA 70 National Electrical code.
e
Observe the locally applicable electrical installa-
tion regulations, fire protection measures,
accident prevention regulations and escape
routes.
9Y0.000.003.B-ROW.book Page 15
