11
The
Fast Configuration Wizard’s
ISDN/PSTN configuration sequence
begins with the
ISDN/PSTN
dialog box.
17
Define the following parameters:
18
Click
Next
.
Field
Description
Network Service
Name
Specify the service provider’s (carrier) name or any
other name you choose, using up to 20 characters.
The Network Service Name identifies the ISDN/
PSTN Service to the system.
Default name: ISDN/PSTN Service
Note
: This field is displayed in all ISDN/PSTN
Network Properties tabs and can contain character
sets that use Unicode encoding.
Span Type
Select the type of spans (ISDN/PSTN) lines,
supplied by the service provider, that are connected
to the RMX. Each span can be defined as a
separate Network Service, or all the spans from the
same carrier can be defined as part of the same
Network Service.
Select either:
•
T1
(U.S. – 23 B ch 1 D channel)
•
E1
(Europe – 30 B ch 1 D channel)
Default: T1
Note:
Only one
Span Type
(E1 or T1) is supported
on the RMX. If you define the first span as type E1
all other spans that you may later define must also
be of type E1.
Service Type
PRI is the only supported service type. It is
automatically selected.
