5
First Entry Power-up
1
Insert the
USB key
with the modified IP addresses into the
USB
port
on the front panel.
2
Power the RMX
ON
. The ON/OFF button is lit (ON).
System power-up sequence may take approximately 10 minutes.
During this time, the parameters in the
lan.cfg
file are uploaded
from the USB key to the RMX’s memory and applied.
Wait for the upload process to complete. Initially all the READY/
IN USE/ERROR LEDs flicker and flash. Upload is completed when
all the LEDs turn off and only the red ERROR LED remains ON.
It remains ON until the
Default IP Network Service
is configured.
Do not remove the USB key from the RMX until the connection
with the RMX is established.
Product Registration and Activation Key Retrieval
Before starting the initial configuration process, register the RMX at the
Polycom Resource Center
website and download the product activation
key file to the computer you will use for the configuration:
1
Using a Web browser, connect to
http://portal.polycom.com
.
2
Login with your
Email Address
and
Password
or register as a new
user.
3
Select the
Product Registration
link.
4
Follow the on-screen instructions for
Product Registration
and
Product Activation
. (The RMX’s serial number is on a sticker on the
back of the unit, if needed.)
5
Write down the
Product Activation Key
number or copy it for later
use.
Connecting to the MCU
1
Start the
RMX Web Client
application on the workstation by
entering in the browser’s address line the IP Address of the control
unit as defined in the
USB key
in the format:
http://<Control Unit IP Address>
and pressing
Enter
.
