10
14
Click the
Next
button.
15
Enter the required
Security
information in the dialog box.
16
Click the
Save & Continue
button.
During the initial
RMX
setup, if the system detects the presence of the
RTM ISDN
card, the I
SDN /PSTN Network Service
definition screens of
the
Fast Configuration Wizard
are enabled.
If there is no RTM ISDN card in the RMX or if you do not want to define
an
ISDN/PSTN Network Service
, go to
Transport Type
Select the protocol that is used for signaling between
the MCU and the SIP Server or the endpoints
according to the protocol supported by the SIP Server:
UDP –
Select this option to use UDP for signaling.
TCP –
Select this option to use TCP for signaling.
TLS –
The
Signaling Host
listens on secured port
5061 only and all outgoing connections are
established on secured connections. Calls from SIP
clients or servers to non secured ports are rejected.
The supported security protocols are: TLS 1.0, SSL
2.0 and SSL 3.0.
Field
Description
Authentication
User Name
Enter the conference, Entry Queue or Meeting Room
name as registered with the proxy.
This field can contain up to 20 ASCII characters.
Authentication
Password
Enter the conference, Entry Queue or Meeting Room
password as defined in the proxy.
This field can contain up to 20 ASCII characters.
A new ISDN/PSTN Network Service can be defined later via the
ISDN/PSTN Network Service ->Add New Service dialog box.
Field
Description
