Preparing Your Room for the Polycom Open Telepresence Experience (OTX) 300 Installation
Page 18 of 32
Network Requirements
Polycom recommends the following bandwidth for HD resolution calls:
Frame Rate
Minimum
Recommended
Maximum
1080p30 High Profile
4.5 Mbps per suite
9 Mbps per suite
18 Mbps per suite
720p60 High Profile
4.5 Mbps per suite
9 Mbps per suite
18 Mbps per suite
Your network must meet these requirements:
•
End-to-end packet loss of less than 0.1%.
•
Latency of less than 150 ms.
•
Packet jitter of less than 40 ms.
In addition, you should:
•
Review the network switch plan on pages 26 and 27.
•
Review your Wide Area Network (WAN) connectivity. You must have sufficient bandwidth to
support HD video as well as capacity for your existing data traffic.
•
Review your Quality of Service (QoS) settings. If you are using Diffserv, you can use Polycom’s
Diffserv markings to fit into your current QoS schema.
•
Review the following Polycom documents, which will assist you in meeting the network
requirements needed to properly deploy the OTX 300:
o
Polycom Open Telepresence Experience Technical Specifications
available at
http://www.polycom.com/products/telepresence_video/telepresence_solutions/immersi
ve_telepresence/otx300.html
.
o
Supporting Real-time Traffic, Preparing Your IP Network for Video Conferencing
,
available at
http://www.polycom.com/products/resources/white_papers/index.html
.
o
Preparing Your IP Network for High Definition Video Conferencing
, available at
http://www.polycom.com/global/documents/services/
professional_services/high_definition_readiness_services/
whitepaper_preparing_your_ip_network_for_hd_video_conferencing.pdf
