Enable LLDP
Enable Link Layer Discovery Protocol (LLDP) to automatically configure your system to a VLAN with data
received from your network switch.
Procedure
1.
In the system web interface, go to
Network
>
LAN Network
>
LAN Options
.
2.
Select the
Enable LLDP
check box so that the system can advertise itself on the network using
LLDP.
If you enable LLDP and then enter a VLAN ID, the VLAN ID you enter supersedes the
autodiscovered VLAN ID from LLDP.
3.
Select
Save
.
Configure Wi-Fi as the Primary Network
You can configure Wi-Fi as your primary network if you’re using Zoom Rooms or Microsoft Teams Rooms
as your conferencing provider. You must use WEP, WPA, or WPA2 Wi-Fi protocols on the 2.4 GHz and 5
GHz spectrums.
Note:
The quality of your calls is dependent on the quality of your Wi-Fi signal.
The system doesn’t support Wi-Fi as a primary network for the following conferencing providers or
modes:
▪ Poly Video Mode
▪ GoToRoom
▪ StarLeaf
▪ RingCentral Rooms
▪ Dialpad
The system doesn’t support the following options if you configure Wi-Fi as your primary network:
▪ Web proxy
▪ Provisioning
▪ 802.1x authentication
Note:
You can pair a TC8 to a system that’s using Wi-Fi as the primary network. To pair a TC8 over Wi-
Fi, the TC8 must be on the same subnet as the video system.
Procedure
1.
In the system web interface, go to
Network
>
Wi-Fi Network
.
2.
From the
Choose Network Type
drop-down menu, select
Wi-Fi
.
3.
Do one of the following:
▪ Select a network from
Available Wi-Fi Networks
. (The system lists networks in order of
signal strength.)
▪ Enter the network name in the
SSID
field.
Configuring Network Settings
43
