POLTI unico MCV80 total clean & turbo, Инструкция по эксплуатации

Страница: 44 / 139

machine body (HEPA filter side): Perform the
cleaning operation by inserting the brush into
the tube making sure that there are no
blockages.
It is recommended that the tubes be cleaned
every time the filters are cleaned and after
every intensive use of the product.
23. REPLACEMENT MULTIBRUSH
RUBBER INSERTS
(extraordinary maintenance)
The rubber strips of the Multibrush, when
worn down, can be replaced with spare parts.
There are two rubber inserts:
- one marked with the letter (F), to be
inserted in the front part of the brush.
- one marked with the letter (R), to be
inserted in the rear part of the brush.
To replace it, proceed as follows:
23.1 Put the Multibrush in position B and turn
it upside down.
23.2 Move the rubber insert to the left, then
lift it upwards.
23.3 Insert the new rubber insert performing
the procedure in reverse.
The rubber inserts are sold at Polti
Authorised Service Centres.
24. SPARE SEALS
Periodically check the condition of the seal
on the handle of the hose and the telescopic
tube. If necessary, replace with the
corresponding spare part, as described
below.
25. STORAGE
25.1 Turn off the appliance and disconnect
from the mains electricity.
25.2 Pull the power cable gently towards you
to activate the automatic winder, guiding it
gently back into the appliance.
25.3 The hose and flexible hose can be
housed on the body of the appliance, sliding
the universal brush into the parking system
on the appliance.
Before storage, we advise quickly drying the
filter and the collector with a cloth to avoid
unpleasant odours forming.
26. FRESCOASPIRA
FrescoAspira is an ambient deodorant which
contains natural essences. During use, it
releases a fresh perfume in every room.
How to insert / replace FrescoAspira:
26.1 Ensure that the appliance is switched off
and disconnected from the mains.
26.2 Disconnect and pull out the dirt
collector.
26.3 Insert the FrescoAspira into the
dedicated space in the HEPA filter (46).
26.4 Reassemble all the parts following the
procedure in reverse order.
We recommend replacing it every 2 months
or in any case when the air freshening
essence is depleted.
FrescoAspira is on sale at household
appliance stores, at Polti Authorised Service
Centres or on the site www.polti.com.
WARNING: The rubber inserts must be inser-
ted with the finely-ridged part facing the
outside of the brush.
RIDGING
- Remove the damaged washer.
- Insert the new washer, applying it
on the steam nozzle and pushing it
into place.
- Lubricate the gasket with silicone
grease or Vaseline, or alternatively
with small quantities of vegetable
oil.
WARNING: Do not lift the appliance with the
telescopic tube and the brush in the parking
position.
F
R
F
R
IT
A
L
IA
N
O
E
N
G
L
IS
H
| 44 |