POLTI unico MCV80 total clean & turbo, Инструкция по эксплуатации

Страница: 39 / 139

It is possible to adjust the suction power by
moving the cursor on the handle.
The combined use of steam and suction
allows the most efficient sanitising of the
surface, dissolving dirt, eliminating grease,
germs and mites, and above all makes it
possible to remove excess humidity and
reduce the cleaning operations time.
PROGRAMMED MODE
For this type of surface there is a pre-set
cleaning program, see Chapter 6.
8. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
SUCTION ONLY FUNCTION
For suction alone, set the Multibrush to
position C (bristle inserts) pressing the pedal
(make sure that the holder with cloth is not
attached to the brush).
Make sure that Chapter 1 has been carried out
and begin the cleaning operations.
It is possible to adjust the suction power by
moving the cursor on the handle (4).
STEAM ONLY FUNCTION
For cleaning only with steam, set the
Multibrush to position A (no insert). Attach
the cloth supplied to the relative holder;
place the holder with cloth on the ground and
position the brush above, applying slight
pressure until a click is heard as it locks into
place (19).
Make sure that Chapter 2 has been carried
out and begin the cleaning operations.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the minimum level of steam.
STEAM - VACUUM COMBINED FUNCTION
to sanitise and dry the surface
For cleaning with steam and suction, set the
Multibrush to position A (no insert). Attach
the cloth supplied to the relative holder (18);
place the holder with cloth on the ground and
position the brush above, applying slight
pressure until a click is heard as it locks into
place (19).
Make sure that Chapters 1 and 2 have been
performed and proceed with the cleaning
operations: steaming with suction on at the
same time to gently treat the surface.
It is possible to adjust the intensity of the
steam by using the +/- buttons (see Chapter
4); for this type of surface we recommend
the minimum level of steam.
It is possible to adjust the suction power by
moving the cursor on the handle.
The combined use of steam and suction
allows the most efficient sanitising of the
surface, dissolving dirt, eliminating grease,
germs and mites, and above all makes it
possible to remove excess humidity left by
the steam and reduce the cleaning
operations time.
9. CLEANING RUGS AND CARPETS
SUCTION ONLY FUNCTION
For suction alone, set the Multibrush to
position A (no insert) by pressing the pedal.
Make sure that Chapter 1 has been carried out
and begin the cleaning operations.
It is possible to adjust the suction power by
moving the cursor on the handle (4).
For suction only, in addition to the
multibrush, it is possible to use the floor
Turbo brush. The Turbo brush thanks to a
turbo system, increased the effectiveness
and efficiency of the suction operations of
To avoid any dirt in the dirt collector causing
bad smells (especially where liquids and/or
steam humidity are vacuumed), we recom-
mend emptying and cleaning after every use
according to the methods described in
Chapter 17.
Before using the appliance on delicate surfa-
ces, ensure that the part in contact with the
surface is free from foreign bodies that
could cause scratches.
For safety reasons, apply the steam lock on
the handle during vacuuming.
Before removing the holder with cloth from
the brush, wait a few minutes to allow the
cloth to cool. Never use the holder without a
cloth.
WARNING: For additional safety, before
using the appliance on delicate surfaces and
those treated with with special oil, wax, etc.
test steam delivery on a hidden part and lea-
ve the steamed part to dry to ensure that no
changes in colour or deformation have oc-
curred.
To avoid any dirt in the dirt collector causing
bad smells (especially where liquids and/or
steam humidity are vacuumed), we recom-
mend emptying and cleaning after every use
according to the methods described in
Chapter 17.
For safety reasons, apply the steam lock on
the handle during vacuuming.
E
N
G
L
IS
H
| 39 |