Polaroid ID-3000, Руководство по ремонту

Страница: 47 / 272

Polaroid ID3000 Service Manual System Installation
2-25
Storing a Portrait and Signature
1. Select Capture Images Only from the operator’s menu.
2. Type an applicant card number, then press <F10>. The message This will be a new ID
will appear.
NOTE: If the system already contains data for this applicant card number, the data
will appear on the screen for verification or editing. If this information
appears and is correct, press <F10> and omit step 3.
3. Type in the data requested at the various applicant data fields, then press <F10>.
4. The message Insert Signature Card Into Slot will appear. If your System includes a
Signature Scanner, insert a signed signature card into the Scanner as shown in Figure 2-
22, signature sideup, cut-corner end first.
NOTE: The card should be signed with a medium point, black felt tip pen.
Figure 2-22 Inserting signature card into Scanner
5. The Signature Scanner pulls the card in and then ejects it in 5 seconds, after electronically
storing the signature.
6. Remove the card from the Signature Scanner.
7. Seat a person in the portrait chair and adjust the portrait camera (using the handle attached
to the camera stand) for proper framing in the monitor.
8. If necessary, adjust the portrait camera focus ring to achieve a sharp portrait on the
monitor.
If the portrait still does not focus sharply, refer to Camera Focusing Calibra
tion in Section 4.