manualshive.com logo in svg

Polaroid ID-3000, Руководство по ремонту

Поделиться
Скачать
Polaroid ID-3000 Скачать руководство пользователя страница 242

Polaroid ID3000 Service Manual

         Parts Replacement

5-44

Printer Types

1.

You should specify the type of printer actually in use: most installations will use Printer 1
as the normal printer, and a parallel interface.

2.

From the printer list displayed by the RRSETUP program, select the appropriate type.
(The list includes types such as HP Laserjet, Generic, Custom, etc.)  If the printer in use is
not listed by name, select Custom.  Enter the control sequences from that printer’s manual
and set up its options, including communication information for a serial interface.

3.

When you have entered all printer configuration data, save it by pressing <Enter>.

4.

Then do the following (just once), to meet R&R’s copy protection requirement:

From Z:\ID3000\RR  type RRLAN

The program will then read the serial number of R&R Disk 1 of each copy of the software
you have, and copy them into the RRUSERS.DAT file.

Thus if you have three copies of this software, there will be three serial numbers in the file
and three users can run R&R simultaneously.

Содержание ID-3000

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды