Polaroid ID-3000 Скачать руководство пользователя страница 261

Страница: 261 / 272

Polaroid ID3000 Service Manual

Appendix

A-9

Type a filename without an extension (SAMPLE), then press <Enter>.

Press <O>ptions, <A>ppend, <N>o.

Press <S>et, <S>elect, <C>hanged, <N>o.

Press <S>et, <S>elect, <T>rees, <Y>es.

Press <S>et, <S>elect, <D>ate, <N>o.

Press <S>et, <S>elect, <I>nclude, then type in C:/SYTOS/BACKUP.LST then press
<Enter>.

Press <V>erify, <F>ile, <S>elected.

Press <Q>uit to return to DOS.

10.

Press <Enter> at the [Y] prompt to save the session.

ACTIVATING SY-CLOCK:

At the end of the day, exit to the DOS prompt and type CD\SYTOS

Type in SYCLOCK - 1

Insert a tape cartridge into the tape drive and close the lever.

The utility will automatically perform a backup at the designated time. Remove and
store the tape at the start of the following day.

Type SYCLOCK - 1 to un-install the utility, then type EXIT to resume normal opera-
tion.

Содержание ID-3000

















































































































































































































































































Результаты поиска

Содержание ID-3000

Отзывы:

Бренды по названию

Популярные бренды

Polaroid ID-3000, Руководство по ремонту

Результаты поиска

Содержание ID-3000

Отзывы:

Бренды по названию

Популярные бренды