manualshive.com logo in svg

Polaroid ID-3000, Руководство по ремонту

Поделиться
Скачать
Polaroid ID-3000 Скачать руководство пользователя страница 12

Polaroid ID3000 Service Manual

         Description

1-8

Capture Portrait and Signature

Permits capturing and storing the applicant’s portrait and signature so that an ID card can be
made at a later time.

Enter Applicant Data Only

Used for entering or updating applicant data only, without capturing a portrait or signature.

Verify Applicant

Permits recalling previously stored applicant data, portrait and signature for review.

Reissue ID Card

Permits reissuing an ID card using a portrait and signature previously stored, or, with Cap-
ture Portrait and Signature menu option, to issue a new ID card using previously stored
portrait, signature and data.

Adjust System

Allows changing the ID card tint; lightening or darkening the card or the portrait; changing
the film processing time. Adjust the Signature Scanner and Color Portrait Scanner when
available.

Содержание ID-3000

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды