manualshive.com logo in svg

Polaroid ID-3000, Руководство по ремонту

Поделиться
Скачать
Polaroid ID-3000 Скачать руководство пользователя страница 251

Polaroid ID3000 Service Manual

         Parts Replacement

5-53

rebooting.

Menus will be displayed to guide you through the installation procedure sequence.
To return to the first menu from any other menu, press <Esc>

The first menu will ask you to select whether to continue the installation or exit to DOS.
Select INSTALL  (The EXIT TO DOS choice is provided for emergencies.)

9.

The next screen will ask which product is being installed. Select the product you are then i
nstalling.

10.

The next series of menus will ask whether certain devices will be used: signature scanner,
color scanner, B&W thermal printer (note that only the B&W thermal printer option
appears for VS-3000), and what the card size is (1-up or 2- up).  Select YES or NO to

indicate whether the device will be used on your system.

11.

The final screen allows you to confirm your selections. Press <F10> if the screen lists the
correct system configuration, or <Esc> if you need to make changes. Pressing <Esc>
repeats the menus.

When all the questions have been answered, the correct software for that system will be
installed.  As diskettes are needed, the system will prompt you to insert them. (You will
insert a total of five disks, plus the Q&B update disk.

12.

If the system uses an Illuminator Board, the TCEINIT program will be run automatically.
Make the settings listed below.

NOTE:  When running this procedure, sometimes a window will appear with a < note >.
 Press <Enter> to continue.

Select OPERATIONAL MODE

Select ILLUMINATOR MODE

Select BOARD CONFIGURATION

Select INTERRUPT LINE

Select NO INTERRUPT
Press <Esc> until you return to the main menu

Select SAVE SETTING

Select POWER UP
Press <Esc> until you return to the main menu

Содержание ID-3000

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды