manualshive.com logo in svg

Polaroid ID-3000, Руководство по ремонту

Поделиться
Скачать
Polaroid ID-3000 Скачать руководство пользователя страница 219

Polaroid ID3000 Service Manual

         Parts Replacement

5-21

Figure 5-25  HP CPU Board with 4 mb Simm RAM

Figure 5-26  Inserting a PC board in the computer

6.

Locate the correct slot for the board being replaced (Figure 5-26).

7.

Handling each board only by the edges (do not touch board components or edge connec-
tors), carefully align each board edge connector with its slot, then gently and firmly press
downward to slide the edge connector into the slot connector (Figure 5-26).  If the
board is full length, be sure the end toward the front of the computer slides into the board
guide.

8.

Install and tighten the board retaining screw.

9.

Connect all necessary cables to the back of the computer.

Содержание ID-3000

















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды