manualshive.com logo in svg

Polaris 600 PRO-RMK, Руководство пользователя

Поделиться
Скачать
Polaris 600 PRO-RMK Скачать руководство пользователя страница 138

136

MAINTENANCE

Battery (if equipped)

Battery Installation

When installing a new battery, make sure it's fully charged prior to its 
initial use. Using a new battery that has not been fully charged can 
damage the battery and result in a shorter life. It can also hinder vehicle 
performance. Follow the battery charging instructions on page 139 
before installing the battery.

1. Ensure that the battery is fully charged.

2. Set the battery in the battery holder.

3. Place the battery shield on the battery bracket. Install the screw to 

secure the shield.

Torque:

7 ft-lbs (10 Nm) 

4. Install the battery hold-down strap.

5. Connect and tighten the red (positive) cable first.

6. Connect and tighten the black (negative) cable last.

CAUTION!

Verify the battery cables and wiring harness do not come into 

contact with the brake disc. Move the wiring harness/cables behind the chassis 
tube and away from the brake disc.

Содержание 600 PRO-RMK











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды