72
THE PERFECT FIT
Handlebar Component Fastener Torques
Component
Torque
Do not over-tighten
IMPORTANT: Moving a handlebar component without first loosening its
screws/set screws may cut grooves into the handlebar, making it difficult
to secure the component. Do not move a handlebar component without
first loosening its mounting screws/set screws.
Take care to avoid damaging hand warmer/brake switch wires when
moving components.
1.
Brake Lever / Master Cylinder
60-80 in-lbs (6.7-9 Nm)
2.
Auxiliary Engine Stop Switch Set Screw
12 in-lbs (1.4 Nm)
3.
Handlebar Hook Screw
Aluminum: 10 ft-lbs (13.5 Nm)
Steel: 18 ft-lbs (24 Nm)
4.
Throttle Lever Block Set Screw
27 in-lbs (3 Nm)
5.
Throttle Lever Block Cover Screws
6 in-lbs (0.7 Nm)
6.
Handlebar Clamp Screws/Bolts
7 ft-lbs (9.5 Nm)
7.
PERC Button Screw
35 in-lbs (4 Nm)
Hand Guard Mounts (if applicable)
Hand-Tight
7
1
2
4/5
6
3
