manualshive.com logo in svg

Polaris 600 PRO-RMK, Руководство пользователя, Страница: 14 / 170

Поделиться
Скачать
Polaris 600 PRO-RMK Скачать руководство пользователя страница 14

12

SAFETY

Operator Safety

Survival Preparation

For your safety, always ride in a group of other snowmobilers. Always 
tell someone where you're going and how long you expect to be gone. If 
it isn't possible to ride with others, and you must travel into remote 
areas, always carry survival equipment that's appropriate to the 
conditions you may encounter. Such equipment may include, but is not 
limited to: extra clothing, a sleeping bag, a flashlight, food and water, a 
signaling mirror, a means of building a fire, and a two-way radio or 
cellular telephone.

Always carry the owner’s manual on your snowmobile. For added 
protection, purchase and carry the following items on your snowmobile 
as well:

Excessive Speed

WARNING!

High speed driving, especially at night, could result in serious injury 

or death. Always reduce speed when driving at night or in inclement weather.

Always observe all state and local laws governing snowmobile 
operation and speed limits. Always be alert and pay attention to the trail 
ahead. If your speed is 40 MPH (64 km/h), your snowmobile is traveling 
about 60 feet (18 m) per second. If you look back for only two seconds, 
your snowmobile will travel about 120 feet (36 m). If your speed is 60 
MPH (96 km/h), your snowmobile will travel about 180 feet (55 m) in 
two seconds.

Traveling at night requires extra caution. Check headlight and taillight 
to ensure proper operation, and don’t over-drive your headlight beam. 
Always be able to bring your snowmobile to a stop in the distance 
illuminated by the headlight. 

• Spare Drive Belt

• Winter Survival Kit

• Extra Set of Spark Plugs

• Trail Map

• Tow Rope

• First Aid Kit

• Extra Oil

• Tool Kit

• Fuel Deicer

Содержание 600 PRO-RMK











































































































































































Отзывы:

Нет отзывов