Polaris 600 PRO-RMK страница 130 Скачать руководство пользователя

Страница: 130 / 170

128

MAINTENANCE

Track Maintenance

WARNING!

Moving parts can cut and crush body parts. When performing the

checks and adjustments recommended on the following pages, stay clear of all
moving parts. Never perform track measurement or adjustments with the engine
running.

Track Tension

Track adjustment is critical for proper handling. Always maintain
correct tension and alignment.

TIP:

Tension adjustments should be made only after the track is warmed up and
limber.

1. Turn the engine off.

2. Lift the rear of the snowmobile and safely support it off the ground.

3. Place the recommended weight or downward pressure on the track

at the specified distance (see chart) ahead of the center of the rear
idler wheel.

4. Measure at the point where the weight is hanging.

TRACK TENSION DATA CHART

Suspension

Slack Measurement

Weight

Measurement

Location

AXYS RMK

and SKS

5/8-3/4 inch

(1.6-1.9 cm)

10 lbs.

(4.54 kg)

16 inches (40 cm)

ahead of rear

idler shaft

Содержание 600 PRO-RMK











































































































































































Результаты поиска

Содержание 600 PRO-RMK

Отзывы:

Похожие инструкции для 600 PRO-RMK

Бренды по названию

Популярные бренды

Polaris 600 PRO-RMK, Руководство пользователя

Результаты поиска

Содержание 600 PRO-RMK

Отзывы:

Похожие инструкции для 600 PRO-RMK

Бренды по названию

Популярные бренды