manualshive.com logo in svg

Polaris 600 PRO-RMK, Руководство пользователя, Страница: 49 / 170

Поделиться
Скачать
Polaris 600 PRO-RMK Скачать руководство пользователя страница 49

47

FEATURES

Engine Overheat Indicators

Flashing Indicator

Flashing indicators indicate continued operation could result in serious 
engine damage. The engine management system will automatically 
reduce engine power and create a misfire condition. Stop the engine 

immediately

. Allow the engine to cool down.

NOTE:

If engine overheating seems to be caused by something other than 

poor cooling conditions, see your dealer for service.

Engine-Cooling Actions

If the engine is overheating, promptly take action to cool the engine.

• Drive in loose snow.
• View the coolant level. 

Do not open the pressure cap while the engine 

is hot

.

• Stop the engine and allow it to cool down.
• Add coolant if the level is low. 

Do not add coolant while the engine is 

hot. Wait for the engine to cool before adding coolant.

NOTICE:

If you must continue to operate while the indicator light is 

illuminated

, 

drive slowly and stop the engine frequently to allow it to cool down.

Extended Idle Engine Shutoff

This engine feature causes the ECU to shut down the engine when 
engine temperature reaches 120

°

 

F (50

°

 

C) and there is no throttle lever 

input for five minutes.

NOTE:

If equipped with an IDD, the gauge will remain on because the key is in 

the ON position.

Содержание 600 PRO-RMK











































































































































































Отзывы:

Нет отзывов