manualshive.com logo in svg

Polaris 600 PRO-RMK, Руководство пользователя, Страница: 45 / 170

Поделиться
Скачать
Polaris 600 PRO-RMK Скачать руководство пользователя страница 45

43

FEATURES

Fuel Type Selection

Whenever using ethanol, MTBE or other forms of oxygenated gasoline, 
the fuel type designation setting must be changed to “Eth” in the gauge. 
When using the recommended 91 non-ethanol gasoline, always select 
the “91-non” setting. 

Whenever in doubt of your fuel purchase, use the 

“Eth” setting as a safeguard.

Standard Instrument Cluster

Use the following procedure to 
change the fuel type designation in 
the gauge. Refer to the fuel type 
selection label located inside the 
left side panel.

1. Start the engine.

2. Lock the parking brake.

3.

Press and release

 the 

SELECT button or SET 
switch until “FUEL” is 
displayed in the lower section 
of the gauge.

4.

Press and hold

 the SELECT button or SET switch until the desired 

fuel type is displayed in the center of the screen.

Interactive Digital Display (IDD)

If your model is 
equipped with the 
interactive digital display 
(IDD), please see your 
IDD Owner’s Manual for 
fuel type selection 
procedures.

Fuel 

Selection

Содержание 600 PRO-RMK











































































































































































Отзывы:

Нет отзывов