4.2 Main controls and parts of the radio
LCD Display
1.
These symbols show that you set a
DCS
or
CTCSS
code in tx or rx. In tx mode it appears while you are transmitting, while in
rx mode it is shown also in stand-by condition.
2.
Received signal strength.
4.
This letter is displayed when the
Dual Watch
function is active.
5.
VOX
function enabled.
6.
Appears when a
positive shift
is activated.
7.
Appears when a
negative shift
is enabled.
8.
Reverse
frequency
9.
Narrow bandwidth:
N = narrow. When the wide (W) bandwidth is activated, no icon is displayed.
10
. This icon indicates the
keypad lock
. To unlock it press
[#
]
.
11
.
Battery level indicator.
When the battery is almost used up, the icon starts blinking and the transmission is blocked.
Charge the radio.
12.
Indicates the
channel number
that you stored
13.
When the radio is in
reception mode
, this icon is displayed
14.
Depending on the setting, it will show the frequency in use, the channel name, the menu setting, etc
