becomes the active listening and transmit frequency or channel.
To save frequencies to channel memory you must be on the A display.
When listening to broadcast FM, the broadcast FM is 88-108 MHz band.
•
[MENU]
key: it is used for activating the MENU, choose each MENU selection and confirm the parameter.
•
[
▲
]
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
control to move the scanning upwards.
•
[
▼
]
key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN
mode, press this control to move the scanning downwards.
•
[EXIT]
key: push this button to exit the functions and settings.
•
Numeric keypad
With these keys you can input the information or your selections on the radio. In tx mode, push the number keys to send a
corresponding DTMF code.
•
*SCAN Key
A short momentary press of the key enables the reverse function.
When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as an
active station is found, regardless of scanner resume method.
To enable the scanner, press and hold the
[*SCAN]
key for about two seconds.
•
Zero 0 Key
