set.
b.
You can change the scanning direction with the
▲
and
▼
keys.
c.
Press any key to stop scanning.
Note: for Scan mode, see Menu No.18.
6.3 Search CTCSS/DCS Code
With this function you can search and store the CTCSS/DCS code used by other radios.
Procedure:
a.
In frequency mode press
[MENU]+[1][1].
b.
Press
[MENU]
key again.
c.
Press
[*scan]
key; CT will blink on the display.
d.
When another radio is transmitting, the display will show the CTCSS/DCS code.
e.
After searching the CTCSS code, the radio will beep and stop scanning.
f.
After setting, press
[MR/VFO]
key for confirmation and store, or press
[PTT]
or
[EXIT]
key to return to standby mode.
NOTE 1: the DCS scanning has the same procedure of CTCSS code, but you have to select MENU+10 to enter scanning.
NOTE 2: if CTCSS has not searched the code, you can search using the DCS mode.
6.4 Cursor
▼▲
Conversion (A/B)
Directly press
[A/B]
key to move the cursor up and down. Then, you can modify or confirm the parameters indicated by the
cursor.
Important1: UV5R PRO has a dual-frequency display function. In frequency mode, you will see on the display two different
receiving and transmitting frequencies; while in channel mode the two different channels will be displayed.
Important2: In frequency or channel mode, press the
[A/B]
key to shift between the main channel A and the sub-channel B
▲
on the display indicates on which channel (main channel A or sub channel B) you are operating.
