•
PURPLE
•
ORANGE
(33) Alarm Mode (AL-MOD) - MENU No.32
This function can set the tone alarm/code alarm/site alarm of the radio.
Keep pressed the
[CALL]
key for 3 seconds to start the alarm tone.
The following three options can be selected:
•
SITE:
the speaker emits an alarm tone but the radio doesn’t transmit;
•
TONE:
the speaker emits an alarm tone and the radio transmits it;
•
CODE:
the speaker emits an alarm tone and the radio transmits it followed by ANI-ID code.
(34) Frequency band (BAND) - Menu No.33
In frequency mode, press the
[BAND]
key to choose the desired frequency band.
VHF:
150 - 174MHz
UHF:
400 - 480MHz
Note: This function is applicable to some models with [BAND] key.
(35) Dual Watch (TDR-AB) - Menu No.34
When this function is on, you may receive signals of A/B channel or frequency. It can also be used for cross band receiving
and transmitting. You can choose amongst the following settings:
OFF:
UV5R PRO can receive in both VFO (not simultaneously);
▲
or
▼
will blink on the transmitting frequency band.
A:
the radio can receive in both VFO (not simultaneously) but can transmit in VFO A only.
B:
UV5R PRO can receive in both VFO (not simultaneously) but can transmit in VFO B only.
If you choose option A, it means that 432.5875MHz is the tx frequency band, while 145.550MHz is the rx frequency band;
the upper VFO shows 452.5875 MHz while in the lower VFO 155.550MHz will be displayed; you can receive on both
