You can choose amongst 4 possibilities.
•
OFF:
press PTT to turn it off
•
BOT:
the code is sent when you press the PTT
•
EOT:
the code is sent when the PTT is released
•
BOTH:
the code is sent when you press and release the PTT
Note: select ‘OFF’ when using in case of affecting the radio.
(21) PTT ID delay (PTT-LT) - MENU No.20
In this MENU you can set the delay time (0-30ms) sending the PTT-ID.
Note: select ‘0’ in normal using.
(22) Channel A Display Mode (MDF-A) - MENU No.21
This function is used to set the display mode of channel A.
Display modes:
•
FREQ.:
Fre channel No.
•
CH:
Channel number
•
NAME:
Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Channel B Display Mode (MDF-B) - MENU No.22
This function is used to set the display mode of channel B.
Display modes:
•
FREQ.:
Fre channel No.
•
CH:
Channel number
•
NAME:
Channel name
