PNY S-Cure, Руководство пользователя

Страница: 8 / 15

Manual Data Migration
Data migration allows you to add hard drives to a single drive, or set of drives attached to
the S-CURE™ card, to change the type of RAID, and increase it’s size, protection, and
speed (benefits will vary, depending on what type of RAID is selected).
To migrate your data, first make sure that the array you wish to convert and the un-con-
figured drives you want to add to the array are both attached to the card and show up in
the PNY Storage Manager. Select the array. If un-configured drives are found, then the
‘Migrate button’ will become available.
After you click on the Migrate button, the migrate dialogue will appear. Select the drives
you wish to add to the array, the types or RAID mode you will end up with will become
highlighted in the RAID Type window at the bottom of the migrate dialogue. At the bottom
of the window, there is a box for Partition Stretching Options. If you select ‘Automatically
expand partition’ the PNY Storage Manager will stretch the last logical disk on the array
to include your new space. If this option is available, we recommend you press yes. If this
option is not available or you choose not to use it, you will need to go to the windows
Disk Manager to configure any new space you have as a result of the migration. After you
have finished your selection, press Start to begin the migration.
13
This operation cannot be cancelled once it has begun. The process may take several
hours, but you can continue to use your computer as normal during this process, includ-
ing shutting down or restarting your computer. If your new array has additional capacity,
you must reboot your PC after migration is completed before the computer will see the
new space.
After the migration finishes, the following message will appear to prompt you to restart
your computer.
14