Plymovent MultiDust BANK 2F, Руководство пользователя

Страница: 22 / 52

0000100519/121212/0 MDB-2X/2F/4F
EN - 21
0
8 DisPOsAl
After life of the product, dispose it of in accordance with
federal, state or local regulations.
cE DEclArAtiON
CE declaration of conformity for machinery
We, Plymovent Manufacturing BV, Wezelkoog 11, 1822 BL
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the product(s):
- MDB-2X
- MDB-2F
- MDB-4F
which this declaration refers to, is in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2004/108 EC
- LVD 2006/95 EC
- ErP directive 2009/125/EC ( MDB-2F and MDB-4F only)
Alkmaar, the Netherlands, 12 December, 2012
Ir. F. Coehoorn
Vice President Research & Development
An installation is defined as a combination of several finished
products or components that are assembled by an installer
at a given place. The various parts of the installation are
intended to operate together in a particular environment and
to perform a specific task. The entire installation must
comply with the relevant directives and standards. The
assembly instructions given by the manufacturer, as well as
the whole method of installation, must be in accordance with
good engineering practices within the context of installations,
as well as installation rules. Considering the above, the
installer will be responsible for completing the installation
and issuing the final CE Declaration of Conformity.