Plymovent MultiDust BANK 2F, Руководство пользователя

Страница: 4 / 52

0000100519/121212/0 MDB-2X/2F/4F
EN - 3
0
PrEFAcE
using this manual
This manual is intended to be used as a work of reference for
professional, well-trained and authorized users to be able to
safely install, use, maintain and repair the product
mentioned on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this
manual:
tiP
Suggestions and recommendations to simplify
carrying out tasks and actions.
AttENtiON
A remark with additional information for the user.
A remark brings possible problems to the user’s
attention.
cAutiON!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop
or the environment.
wArNiNg!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
wArNiNg!
Denotes risk of electric shock.
wArNiNg!
Fire hazard! Important warning to prevent fire.
Use protection gloves, if not carried out with the
necessary caution, may cause serious personal
injury.
Use breathing protection, if not carried out with
the necessary caution, may cause serious personal
injury.
service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing
to help you. Make sure you have the following specifications
at hand:
- product name
- serial number
These data can be found on the identification plate.
text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
1 iNtrODuctiON
1.1 Identification of the product
The identification plate contains, among other things, the
following data:
- product name
- serial number
- supply voltage and frequency
- power consumption
1.2 general description
The MDB-2X is a self cleaning filter unit with integrated
controls, including on/off fan control with overload protection
up to 2.2 kW. The fan itself is not included.
The MDB-2F is a self cleaning filter unit with integrated
extraction fan of 1.1 kW and controls.
The MDB-4F is a self cleaning filter unit with integrated
extraction fan of 2.2 kW and controls. This product features
a frequency inverter.
All the units are preassembled for easy installation.
The fan pulls the air with particulate through the filters.
When the pressure over the filter reaches a certain point, the
internal self-cleaning mechanism begins to clean the filter
cartridges by means of compressed air shots, resulting in the
particulate dropping into a dustbin at the bottom of the unit.