Plymovent DRAFTMAX BASIC, Инструкция по установке и эксплуатации

Страница: 11 / 21

0507060400/010920/M DraftMax Basic | DraftMax Ultra 10
4.4.8 Working light
□ Lighting fixture with 2,3 m of cable and plug
□ Bolts M6 (6)
□ Tie-wrap (3)
To install the working light, do the following.
Fig. 4.18
• Install the lighting fixture on the back panel or backdraft
panel with the 6 bolts (A).
Fig. 4.18
A (x6)
Mounting of the lighting fixture
Fig. 4.19
• Lead the cable down the back side of the downdraft table.
• Attach the cable to the back panel or backdraft panel with
the 3 tie-wraps (B).
• Connect the cable (refer to Fig. 2.3B).
Fig. 4.19
B (x3)
Mounting of the cable
4.4.9 Movement sensor
□ Automatic start/stop device with 2,3 m of cable
and plug
□ Bolts M6 (2)
□ Tie-wrap (3)
To install the movement sensor, do the following.
Fig. 4.20
• Install the movement sensor on top of the back panel or
backdraft panel with the 2 bolts (A).
Fig. 4.20
A (x2)
Mounting of the movement sensor
Fig. 4.21
• Lead the cable down the back side of the downdraft table.
• Attach the cable to the back panel or backdraft panel with
the 3 tie-wraps (B).
• Connect the cable (refer to Fig. 2.3A).
Fig. 4.21
B (x3)
Mounting of the cable
4.4.10 Welding cable sensor
□ Clamp with 2,3 m of cable and plug
□ Tie-wrap (3)
To install the welding cable sensor, do the following.
• Connect the cable (refer to Fig. 2.3A).
4.4.11 Bench vice mounting bracket
The bench vice mounting bracket is suitable for mounting on
the standard work grid only.
□ Mounting bracket
□ Strip (2)
□ Bolt M6 (4)
□ Nut M6 (4)
□ Washer (8)
To install the bench vice mounting bracket, do the following.
Fig. 4.22
• Determine the desired position and put the mounting
bracket on the grid.
• Install the strips below the grid and attach them with the
bolts, nuts and washers.