Plusmed pM-BP25 Pro S/T, Инструкция по эксплуатации

Страница: 32 / 40

32
(1) Flip the humidifier door on the right side of the humidifier.
(2) Remove the humidifier tank by sliding it out of the humidifier base.
(3) Rinse the tank with water. Fill the tank to the fill line with room
temperature distilled water (Maximum 225ml)
CAUTION: Use only distilled water in the tank.
Fill the humidifier with room temperature water only. Filling the humidifier with water that is too cold or too hot may
cause errors in the humidifier, cause the LED indicator to blink.
WARNING: Do not move, upside down, lean or shake the device if there is water in the humidifier, clear up
the water first. Otherwise the water may flow into the machine and cause malfunction or damage.
Fig. 25Filling the water tank
4.3 Start Treatment
(1) Plug in the device to an AC power source to power up the unit. The LCD screen lights up.
(2) Set the parameter by physician.
(3) Put on your mask assembly when the air starts to flow.
(4) Lie down and arrange the air tubing so that it is free to move.
(5) Relax. Take normal breaths through your nose.
NOTE: If you have trouble with your mask, see Section 7 troubleshooting, for some suggestions.
To stop treatment at any time, remove your mask and unplug the power plug.
CAUTION: Always empty the water tank before move the BPAP unit.
4.4 Traveling with the BPAP Unit
When you are traveling, the BPAP unit carrying case can be used for carry-on luggage only. The carrying case
will not protect the BPAP, thus is not suitable for transportation.
For your own safe, take the user manual with the device.
CAUTION: Always empty the water tank before packing the humidifier.
Max. Line