Plusmed pM-BP25 Pro S/T, Инструкция по эксплуатации

Страница: 31 / 40

31
Fig. 20 tube connect Fig. 21 tube and mask connect
4.1.4 Using AC Power
Complete the following steps to operate the device using AC power.
(1) Connect the AC power cord into DC Power Adapter,
(2) ) Insert the plug of AC power cord into the electrical outlet (not controlled by a wall switch), as shown in Fig 23,
(3) Plug the Adapter connector into the power inlet on the side of the device, as show in Fig 22.
Fig. 22 power cord connect Fig. 23 power cord connect
CAUTION: To remove AC power, disconnect the power supply cord from the electrical outlet. Inspect the power
cord often for any signs of damage. Replace a damaged power cord immediately. Only use the Plusmed DC power
adapter available from your provider. Use of any other adapter may cause damage to the device.
4.1.5 Assembly the Humidifier
A humidifier may be required if you are experiencing dryness of the nose, throat or mouth.
Place the main device on the humidifier base. Position the main device so that the air inlet port on the humidifier
connects to the air outlet port on the device. Use the latch on the humidifier base as a guide to properly connect
the main device to the humidifier.
Fig. 24 connect the main device
Filling the water into Humidifier tank