Plus N-20 Series, Руководство по сборке и настройке

Страница: 9 / 17

E-8 E-8
Mount the main unit to the wall. Attach the pen tray to the main unit before
mounting. (See page E-4.)
1
. Preparing the place of mounting
Insert a gimlet or other pointed object accurately through the center of the screw holes in the Wall Bracket Mounting
Dimensional Drawing below to mark the wall surface.
Note
• When the building does not have posts, please use the stand.
The dimensions for the bracket mounting positions are the same as shown below.
1130
936
1200 (centers of the top/bottom fixing brackets)
Center of the bottom fixing
bracket threaded hole
Center of the top fixing
bracket threaded hole
standard type:1480 (unit shape)
wide type:1980 (unit shape)
27
27
995 (unit shape)
70
70
Side board
(ex.)
Stud
Columns over 110 mm
5. WALL MOUNTING
●
For plywood and similar wall structures
Make sure that there are columns and/or studs that match up with the mounting dimensions. When there is no column
in the desired installation location, place a side board between the nearby columns.
●
For concrete walls
Place commercially available anchor bolts and anchor nuts for M5 screws in the mounting positions.
Wall Bracket Mounting Dimensional Drawing
(Ex.) For plywood and similar wall structures
* Pen tray, not including projecting parts.