Plus N-20 Series, Руководство по сборке и настройке, Страница: 14 / 17

E-13
* The diagram used for explanation here is see-through.
Put the main unit's AC power adapter and the printer's AC power
adapter in the AC power adapter box.
Place any extra cable length in the AC power adapter box so that no
cable is hanging out.
WARNING
• The AC power adapters and the power
cords generate heat. Be sure to wire
them in such a way that they keep apart.
Do not bundle the cables together. Doing
so could cause them to heat up, leading
to fire.
Put the cables in the notches (top and bottom) on the left side of the
AC power adapter box and attach the AC power adapter box to the
printer table.
Catch the upper flange of the AC power adapter box on the left and
right bracket screws (M4 x 20) to suspend the AC power adapter box.
This completes wall mounting.
Make a test print. See page E-15.
5. Wall Mounting
AC power adapter box
For explanation purposes, the printer and connection
wires are omitted from this diagram.
Screw (M4 x20)
Flange